Hyundai Palisade suspension problems: 105 NHTSA complaints across 6 model years (2020–2025).
Across all model years of the Hyundai Palisade, there have been 105 NHTSA complaints specifically related to suspension, spanning from 2020–2025. Below is a year-by-year breakdown showing which Palisade model years have the strongest official complaint and recall signal for this component.
| Year | Vehicle | Complaints | Recalls |
|---|---|---|---|
| 2020 | 2020 Hyundai Palisade | 47 | 0 |
| 2021 | 2021 Hyundai Palisade | 20 | 0 |
| 2022 | 2022 Hyundai Palisade | 13 | 0 |
| 2023 | 2023 Hyundai Palisade | 16 | 0 |
| 2024 | 2024 Hyundai Palisade | 6 | 0 |
| 2025 | 2025 Hyundai Palisade | 3 | 0 |
The suspension system isolates the chassis from road inputs, maintains tire contact during cornering and braking, and on adaptive applications adjusts damping and ride height in real time. Reports describe coil-spring fractures, strut and shock failures, control-arm bushing wear, ball-joint separation, and on air-suspension equipped vehicles, compressor failures and air-bag leaks that drop the vehicle to its bump stops. Severe suspension failures can cause loss of vehicle control, accelerated tire wear that compromises handling, and in the case of ball-joint separation, immediate loss of steering control on the affected wheel.
Clunking over bumps, uneven tire wear patterns, vehicle pulling to one side, and noticeably softer or harsher ride compared to original characteristics indicate suspension components needing inspection.
With 105 hyundai palisade suspension complaints reported across 1 model spanning 2020–2025, this combination falls into a elevated signal band. In practice, that means the volume is high enough that NHTSA may be examining trends across affected vehicles, and individual owners should review the specific defect descriptions for patterns relevant to their model and year. Complaint volume is not the only thing that matters — severity (whether the defect caused crashes, fires, or injuries) and consistency (whether multiple owners describe the same failure mode) are equally important when assessing real-world risk.
This breakdown shows how Hyundai Palisade Suspension complaints are distributed across model years. A concentration in a particular year usually signals a generation-specific defect that may have been corrected in subsequent model years.
| Model Year | Vehicles | Complaints | Distribution |
|---|---|---|---|
| 2025 | 1 | 3 | |
| 2024 | 1 | 6 | |
| 2023 | 1 | 16 | |
| 2022 | 1 | 13 | |
| 2021 | 1 | 20 | |
| 2020 | 1 | 47 |
If your vehicle is exhibiting hyundai palisade suspension issues that match the patterns described in NHTSA complaints, take these steps in order. First, check your VIN for active recalls using NHTSA's free recall lookup tool — recall remedies are repaired at no cost to the owner regardless of warranty status. Second, document the failure with dated photos or video, and keep copies of any service records, parts replacements, or dealer communications related to the issue. Third, file a complaint with NHTSA at nhtsa.gov/recalls — every complaint contributes to the pattern recognition that triggers investigations and, ultimately, recalls. The complaint should describe what happened, when, the vehicle's mileage at the time, and whether anyone was injured. Fourth, if the issue presents an immediate safety hazard (loss of braking, steering, throttle control, fire, or unintended airbag deployment), discontinue driving and have the vehicle towed to a qualified repair facility rather than risking a crash to reach a dealer.
The data on this page is drawn from three distinct NHTSA sources that owners frequently confuse. Complaints are reports submitted by individual vehicle owners describing a problem they experienced — they are unverified narratives, but in aggregate they reveal patterns. Recalls are formal manufacturer-initiated campaigns to repair a confirmed safety defect on a specified set of VINs; the manufacturer pays for the repair and is required to notify affected owners by mail. Investigations are NHTSA-led inquiries that often start when complaint volume crosses a threshold for a particular component or model — they may conclude with a manufacturer-issued recall, a finding of no defect, or remain open while data accumulates. A high complaint count without a corresponding recall does not mean the issue is unimportant; it sometimes means an investigation is ongoing or that NHTSA has not yet acted. Conversely, a small recall on a low-complaint model means the defect is severe enough that the manufacturer chose to remediate proactively.
This page aggregates hyundai palisade suspension safety records published by the U.S. National Highway Traffic Safety Administration (NHTSA). Records are matched to make, model, and year using NHTSA's classifications, and complaint counts are deduplicated by ODI number. The dataset includes consumer complaints, manufacturer-issued recalls, Technical Service Bulletins, and crash investigations. Records are refreshed on a rolling basis as new complaints, recalls, and TSBs are published. Counts on this page reflect what is currently in our database; we do not include records flagged as duplicate, withdrawn, or outside the model-year window.
NHTSA's database currently shows 105 hyundai palisade suspension complaints across 1 distinct model spanning 2020–2025. Complaint counts grow continuously as new owner reports are filed and processed.
The Palisade, with the top model accounting for 105 reported suspension complaints. The complete model breakdown is available in the table on this page.
Among the records on this page, the 2020 model year accounts for the highest suspension complaint volume (47 reports). A concentration in a single year often indicates a generation-specific defect; concentrations across consecutive years can suggest an ongoing supplier or design issue.
Recall status varies by VIN. Even when complaint volumes are high, recalls are issued per-defect, not per-component, so some hyundai palisade suspension complaints lead to recalls while others remain unaddressed. Check your specific VIN against NHTSA's recall lookup or browse the recall pages linked from each vehicle profile to see which campaigns apply.
Complaints are unverified owner reports; recalls are formal manufacturer campaigns to repair confirmed defects on specified VINs at no cost to the owner. Complaints often come first and, when patterns emerge, can prompt investigations that lead to recalls. A high complaint count on a vehicle without a recall does not mean the issue is benign — it sometimes means investigation or remedy is still in progress.
It depends on (1) whether the issue is covered by an active recall and the recall has been performed, (2) the severity of the failure modes reported, and (3) whether the specific VIN has a documented service history showing the relevant repairs. A used-vehicle inspection by a qualified mechanic, plus a VIN check against NHTSA's recall database, are the practical minimum steps before purchase.
Submit safety complaints directly to NHTSA at nhtsa.gov/recalls — there is no fee, and you do not need to be the original owner. Include the VIN, model year, mileage at time of incident, a description of what happened, and whether anyone was injured. Each complaint contributes to the pattern recognition NHTSA uses to decide whether to open an investigation.