2025 Toyota Crown Signia Safety Report

Electrical System

3 owner complaints mention this component in the current safety profile.

Unknown Or Other

2 owner complaints mention this component in the current safety profile.

Exterior Lighting

2 owner complaints mention this component in the current safety profile.

Structure

1 owner complaint mention this component in the current safety profile.

Unknown Or Other,Forward Collision Avoidance

1 owner complaint mention this component in the current safety profile.

Service Brakes,Forward Collision Avoidance

1 owner complaint mention this component in the current safety profile.

Issues with the electrical system, including instrument panel malfunctions and USB-C port malfunctions, are common.

Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of F...

Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.

Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed May 9, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.

Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor (PVM) system. Please see the recall report for a complete list of models. A software error may cause the rearview camera to freeze or display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Consequence: A rearview camera that fails to display an image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

Remedy: Dealers will update the parking assist software, free of charge. Owner letters were mailed January 2, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB13 and 25LB06. Subaru's number for this recall is WRE25.

Summary: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Toyota Venza, 2023-2025 RAV4 Prime, RAV4, Highlander, GR Corolla, Crown, 2024-2025 Lexus TX, LS, Toyota Tacoma, Grand Highlander, and 2025 Lexus RX, Toyota Crown Signia, Camry, RAV 4 Plug-in Hybrid (PHEV), and 4 Runner vehicles. Due to an error in the instrument panel software at vehicle startup, the instrument panel may fail to display vehicle speed, brake system, and tire pressure warning lights.

Consequence: An instrument panel display that does not show critical information can increase the risk of a crash or injury.

Remedy: Dealers will update the instrument panel software for non-PHEV vehicles, free of charge. For PHEV vehicles, dealers will inspect the instrument panel assembly, and either replace it, or update the software, free of charge. Owner letters were mailed December 5, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB08 and 25TA08. Lexus' number...

One of the USB-C charging ports caved into the dashboard only several months after purchasing the car, resulting an oddly hole on the dashboard and non functional charging port.

The contact's wife owns a 2025 Toyota Crown Signia. The contact received notification of NHTSA Campaign Number: 25V595000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall r...

The contact owns a 2025 Toyota Crown Signia. The contact stated that while driving at an undisclosed speed, the instrument panel became inoperable, and the display screen appeared blank. The contact received notification of NHTSA Campaign Number: 25V595000 (Electrical System); however, the part for the recall repair was not yet available. The vehicle was taken to a dealer, but was not diagnosed or...

A few weeks after purchasing this vehicle in Dallas, TX we drove to Florida. About 4 hours into the trip we stopped for lunch and noticed both of our cells phones had not charged and in fact had discharged quite a bit. Further testing shows none of the front or rear USB Type-C ports would charge any cell phone we plugged into them. I purchased a USB volt meter and verified that the car would on...

The Toyota Crown Signia Tire Pressure Monitoring gauge has to be reset to properly display on each start versus staying in place on the drivers monitoring dashboard. All other driver monitoring aids, once selected to display on the monitoring dash, stay in place per each start cycle. This has existed as a vehicle defect from day 1. Many others have noted the same issue on various Crown Signia b...

When leaning on the front seat center armrest, the armrest makes a clicking noise when hitting rough or bumpy roads. The Toyota dealer replaced the armrest, and the same issue occurred. Toyota told the dealer they want the part to investigate further.

While driving less than 10 mph, (slightly down hill) approaching the house garage, the car suddenly accelerated and the brake was applied to stop but the car continued and smashed through the garage door, proceeded through garage, smashed through the back of garage, hit a Weber gas grill, proceeded over a low-level deck and hit a large tree. The impact force of the car (left front) against the tr...

As I was driving down a suburban road at about 30mph the brakes suddenly came on by themselves for few seconds as I approached a parked car on my right side. As I started to pass this car my vehicle continued moving forewarned and I did not come to a complete stop. There were no cars in front or behind me except for the one car parked to my right. There were two electric beeps when the car brak...

Driver headlight is lower than passenger headlight creating a big dark side on driver side. Dealership say it can’t be corrected

Two issues: 1. Low-beam headlights shine way too low on the road and unsafely prevent adequate vision of potential road hazards or oncoming cars, and my model "Limited" only has "automatic headlight leveling" without any way to manually set level to raise up the beam to a safe level. 2. Low-beam headlights cast on the road a distracting dark outline of an attachment or harness plug attached to the...

The car was leased on 12/18/2024. On 01/24/2025, after starting the vehicle, the check engine light came on with the description: "a malfunction in the electronic control of the engine, throttle, or automatic transmission has been detected. Contact your Toyota dealer to have your vehicle inspected." I am attempting to get an appointment now to get the car in for service but being a month old - thi...

I had buckled my seat belt and was grabbing my work phone, Iphone 13, to check it before leaving. I accidentally dropped it and it landed on the red part of my seat belt buckle. My seat belt automatically unbuckled. I was able to replicate this several more times. There is something going on with the engine where if you accelerate there is a coolant type smell then if you take your foot off the...

Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures...

The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.

To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+...

Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+...

Some 2021 – 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column...

Long-term or off-site storage requires special care to maintain vehicle condition. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle’s systems and components. Any problems tha...

When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.

During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direct...

2025 model year Toyota vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation P...

The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof,...

To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. ...

Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfa...

Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film wi...

Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surfa...